Connect the HDMI receiver to the HDTV display with an HDMI cable.
Multipoint to multipoint match setting: when multipoint to multipoint connecting and multiple TX and multiple RX connect to the switch, the IP extender can match based on the “SET” setting (eg: “SET” of TX is 0001, “SET” of RX is 0001 Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver.
Connect two pieces of 5V power supply to the transmitter and receiver, the power supply for the equipment, and the LED indicator light on. When the status lamp is on and flickers, the equipment starts normally.
Connect the “IR receiver “into the “IR-TX” port on the transmitter, and the “IR transmitter ” into the “IR-RX” on the receiver, and make sure the IR transmitter aims at the IR receiver of the controlled device if you need the IR control function.